Jones Stainless Steel Radial Extractors
Tanks and cover are made from stainless steel. You can start the reel at slow speed and it will automatically pick up until proper speed is obtained to suit condition of combs. Choice of 4 speeds: 120, 180, 265, 300 turns per minute. Precision built and fitted with ball bearings. Direct friction drive. Simple practical greasing system. Covers and threaded honey gate flange are included. Motor and motor mount are also included.
| ITEM #:EE-1115 | FOR 10 FRAMES |
| ITEM #:EE-1116 | FOR 20 FRAMES |
| ITEM #:EE-1117 | FOR 36 FRAMES |
Maxant Stainless Steel Radial Extractors
| ITEM #:EE-1120 | FOR 10 FRAMES |
| ITEM #:EE-1121 | FOR 20 FRAMES |
| ITEM #:EE-1122 | AS ABOVE BUT WITH ELECTRIC CONTROL |
| ITEM #:EE-1123 | FOR 30 FRAMES |
| ITEM #:EE-1124 | AS ABOVE BUT WITH ELECTRIC CONTROL |
| ITEM #:EE-1125 | FOR 30 FRAMES, WITH CENTRE DRAIN |
| ITEM #:EE-1126 | FOR 50 FRAMES |
| ITEM #:EE-1127 | FOR 70 FRAMES |
| ITEM #:EE-1128 | FOR 70 FRAMES, WITH CENTRE DRAIN |
| ITEM #:EE-1129 | AS ABOVE BUT WITH ELECTRIC CONTROL |
Maxant Parallel Frame Extractors
| ITEM #:EE-1130 | FOR 10 FRAMES ( ECONOMY MODEL ) |
| ITEM #:EE-1131 | FOR 21 FRAMES |
| ITEM #:EE-1132 | FOR 30 FRAMES |
| ITEM #:EE-1135 | BRASS FORK ONLY |
| ITEM #:EE-1140 | FIBRE WHEEL-CLUTCH PLATE |
| ITEM #:EE-1145 | EPOXY COATING ( 1 US QUART ) |
| ITEM #:EE-1150 | SMALL STAINLESS STEEL SUMP & PUMP CONTROL- It is placed between the extractor and the pump. The float trips a built-in electric switch when the tank is full and shuts off just before it is empty, so no air is mixed with the honey. Two strainers inside the tank screen out coarse particles of wax, etc. Supplied with cover. Size of tank 10" x 24" x 12". These are shipped with 1 1/4" outlet connection on end. Cut cover for your inlet pipe. |
| ITEM #:EE-1155 | O.A.C. SUMP TANK AND PUMP CONTROLLER- With 6 baffles, water jacketed 46" long, 19" wide, 17" high. Complete with two 3000-watts, 220-volts heaters with individual thermostats, floats, and switch. 1 1/2" honey outlet in center of bottom at heater end. Customer can cut cover for honey inlet, or furnish us location plan for end or sides. |
| ITEM #:EE-1160 | PLASTIC HOSE 1" |
| ITEM #:EE-1161 | PLASTIC HOSE 1 1/4" |
| ITEM #:EE-1162 | PLASTIC HOSE 1 1/2" |
| ITEM #:EE-1163 | PLASTIC HOSE 2" |
| ITEM #:EE-1165 | BRONZE GEARED HONEY PUMP WITH MOTOR- Complete with motor base, reduction V pulleys and V belts. One-inch inlet and outlet use 1 1/4" pipe. |
| ITEM #:EE-1166 | BRONZE GEARED HONEY PUMP WITHOUT MOTOR- Without motor base, reduction V pulleys or V belts. One-inch inlet and outlet. |
| ITEM #:EE-1170 | 1 1/2" VIKING PUMP |
| ITEM #:EE-1175 | JONES 1 1/2" HONEY PUMP COMPLETE WITH MOTOR BASE- For larger beekeeper. Complete with motor base & reduction gears. Belt drive from motor to shaft and double-link chain drive from shaft to pump. Requires 1 h.p. motor. Not included. |
| ITEM #:EE-1180 | PERFECTION HONEY GATES 1 1/4" |
| ITEM #:EE-1181 | PERFECTION HONEY GATES 1 1/2" |
| ITEM #:EE-1182 | PERFECTION HONEY GATES 2" |
| ITEM #:EE-1190 | PLASTIC HONEY GATES 3/4" |
| ITEM #:EE-1191 | PLASTIC HONEY GATES 2" |
| ITEM #:EE-1195 | PLASTIC ADJUSTABLE HONEY GATES 1 1/4" |
| ITEM #:EE-1196 | PLASTIC ADJUSTABLE HONEY GATES 1 1/2" |
| ITEM #:EE-1197 | PLASTIC ADJUSTABLE HONEY GATES 2" |
